edurosECDIS Course Introduction

Contents of the course

1. Familiarization with available functions.
   1. Description of the System Configuration.
      1. Description of configuration of Software. (Operation software, Application software)
      2. Description of configuration of SSD. (C: & D: )
      3. Description of time for replacement of consumables SSD, Cooling Fans, etc.
      4. Description of operation of ECDIS under ship power blackout.
      5. Description of configuration of connected signals from other devices.
   2. Description of difference points for each models.
      1. Description of difference points between B-type (JAN-701B/901B/2000) and MFD-type (JAN- 7201/9201)
   3. Basic Operations.
      1. How to power On/ Off the ECDIS.
      2. Description of home position function.
      3. How to shift the chart with the hand-cursor.
      4. How to shift the chart with the cross-cursor.
      5. Description of automatically shifting the chart according to the own ship position.
      6. Description of zoom out/in functions.
      7. How to select the motion mode.
      8. How to select the bearing mode.
      9. Description of chart information available for display
      10. How to input the event mark.
      11. Description of MOB (Man over board) function.
      12. How to display information of ENC with "Readout chart information" function.
      13. How to display information of the AIO.
      14. How to display information of the mark which added by user.
2. Familiarization with the menu structure.
   1. Description of the menu structure.
      1. Description of the menu structure.
3. Display setup.
   1. Description of the Own Information and Sub Information.
      1. Displaying time and how to change UTC time over local time.
      2. Description of Information of navigation sensor.
      3. Description of different between the GPS position and the CCRP.
      4. Description of setting length of vectors.
      5. How to display of TT/ AIS.
      6. How to display of the RADAR echo.
      7. Description of sounding depth.
   2. Description of the navigation tools.
      1. How to measure the distance and bearing by EBL /VRM / Parallel Index functions.
      2. Description of "Anchor Watch" function.
      3. How to display and setup of the NAVTEX message.
      4. How to display and set up of Logbook + Setting of the logging events and view filter.
E1. Practical exercise.1
1. Practical exercise 1.1.
2. Practical exercise 1.2.
3. Practical exercise 1.3.
4. Setting of safety values.
   1. Setting of ECDIS.
      1. How to setup of own ship view options
      2. Description of the own ship position offset function and attention of this function.
      3. How to setup of display ENC.
      4. How to setup of detecting danger situation
      5. How to setup of the date and time.
      6. How to setup of TT/AIS, + Setting Target filter.
      7. How to setup of the RADAR overlay.
      8. Description of the user map function. (Drawing " No go line" and "No go area" and entering text)
      9. How to setup of buzzer volume.
E2. Practical exercise.2
1. Practical exercise 2.1.
2. Practical exercise 2.2.
3. Practical exercise 2.3.
4. Practical exercise 2.4.
5. Practical exercise 2.5.
6. Practical exercise 2.6.
5. Recognition of alarms and malfunction indicators and the actions to be taken.
   1. Description of the Alert Notification.
      1. Description of the alert notification
6. Route planning.
   1. Route Planning.
      1. How to setup of design parameters for route planning.
      2. How to plan the route
      3. How to check the safety status on the planned route.
      4. Description of the other function for planning route
E3. Practical exercise.3
1. Practical exercise 3.1.
2. Practical exercise 3.2.
3. Practical exercise 3.3.
7. Route monitoring.
   1. Route monitorings.
      1. How to select of the route.
      2. How to select WPT.
      3. Description of the voyage monitoring information
E4. Practical exercise.4
1. Practical exercise 4.1.
8. Changing over to backup systems.
   1. Changing over to backup system.
      1. How to transfer Main ECDIS's data to the backup system
9. Loading charts and licenses.
   1. Charts importing and updating.
      1. How to import ENC.
      2. How to update ENC.
      3. How to update cell permit.
      4. How to check update status of ENC.
      5. Description of updating ENC with manual.
E5. Practical exercise.5
1. Practical exercise 5.1.
2. Practical exercise 5.2.
10. Updating of the software.
    1. Confirmation and Updating of the software.
       1. Description of confirmation of the software version.
       2. Description of updating of the software.